Högskolan i Skövde

The use of virtual reality in engineering tasks, such as in virtual commissioning, has increased steadily in recent years, where a robot, machine or object of interest can be simulated and visualized. Yet, for a more immerse experience, an environment for the object in question needs to be constructed. However, the process for creatingan accurate environment, for a virtual simulation have remained a costly and a long endeavour. Because of this, many digital simulations are performed, either with no environment at all, or present a very basic and abstract representation of an intended environment.The aim of this thesis is to investigate if technologies such as LiDAR and digital photogrammetry could shorten the environment creation process. Therefore, a demonstrative virtual environment was created and analysed, in which the different technologies was investigated and presented in the form of a comprehensive review of the current state of the technologies with in digital recreation. Lastly, a technique specific evaluation of the time requirement, cost and user difficulty was conducted. As the field of LiDAR and digital photogrammetry is too vast to investigate all forms thereof within one project, this thesis is limited to the investigation of static laser scanners and wide lens camera photogrammetry. A semi industrious locale was chosen for digital replication, which through static laser scans and photographs would generate semi-automated 3D models.The resulting 3D models leave much to be desired, as large holes were present throughout the 3D models, sincecertain surfaces are not suitable for neither replication processes. Transparent and reflective surfaces lead to ripple effects within the 3D models geometry and textures. Moreover, certain surfaces, as blank areas for photogrammetry or black coloration for laser scanners led to missing features and model distortions.Yet despite the abnormalities, the majority of the test environment was successfully re-created. An evaluation of the created environments was performed, which list and illustrate with tables and figures the attributes, strengths and weaknesses of each technique. Moreover, technique specific limitations and a spatial analysis was carried out. With the result, seemingly illustrating that photogrammetry creates more visually accurate 3D models in comparison to the laser scanner, yet the laser scanner produces a more spatially accurate result. As such, a selective combination of the techniques can be suggested.Observations and interviews seem to point towards the full scale application, in which an accurate 3D model is re-created without much effort, to currently not exist. As both photogrammetry and static laser scanning require great effort, skill and time in order to create a seemingly perfect solid model. Yet, utilizing either, or both techniques as a template for 3D object creation could reduce the time to create an environment significantly.Furthermore, methods such as digital 3D sculpting could be used in order to remove imperfections and create what is missing from the digitally constructed 3D models. Thereby achieving an accurate result.