Högskolan i Skövde

his.sePublikationer
Ändra sökning
Länk till posten
Permanent länk

Direktlänk
Quesada Díaz, RaquelORCID iD iconorcid.org/0000-0002-9268-8628
Publikationer (10 of 12) Visa alla publikationer
Quesada Díaz, R., Hanson, L., Högberg, D., Iriondo Pascual, A. & Bandaru, S. (2026). A Digitalisation-Focused Ergonomics Maturity Modelfor Industry 5.0. In: Denis A. Coelho; Päivi Kekkonen (Ed.), Revitalizing Nordic Ergonomics for the Future – Proceedings of the 53rd Nordic Ergonomics and Human Factors Society Conference, Jönköping – Sweden, October 21–23, 2026: . Paper presented at Revitalizing Nordic Ergonomics for the Future: 53rd Nordic Ergonomics and Human Factors Society Conference (NES 2026), Jönköping – Sweden, October 21–23, 2026 (pp. 47-48). Jönköping: JU – Jönköping University, in collaboration with NES – Nordic Ergonomics and Human Factors Society Conference
Öppna denna publikation i ny flik eller fönster >>A Digitalisation-Focused Ergonomics Maturity Modelfor Industry 5.0
Visa övriga...
2026 (Engelska)Ingår i: Revitalizing Nordic Ergonomics for the Future – Proceedings of the 53rd Nordic Ergonomics and Human Factors Society Conference, Jönköping – Sweden, October 21–23, 2026 / [ed] Denis A. Coelho; Päivi Kekkonen, Jönköping: JU – Jönköping University, in collaboration with NES – Nordic Ergonomics and Human Factors Society Conference , 2026, s. 47-48Konferensbidrag, Muntlig presentation med publicerat abstract (Refereegranskat)
Abstract [en]

Industry 4.0 has been characterised by the role of digitalisation in shaping manufacturing systems. Building on this foundation, Industry 5.0 places greater emphasis on human-centric and sustainable manufacturing, where technological development supports both worker well-being and organisational performance. The combination of digitalisation and human-centricity introduces new requirements for how ergonomics is addressed, which creates a need for maturity and culture models that account for this combined context. Existing approaches include the Ergonomics Maturity Model (EMM) (Rodríguez et al., 2022), broader safety and organisational culture models (Fleming, 2001; Hudson, 2001), and frameworks addressing the integration of human factors into organisational processes (Carayon et al., 2014; Dul et al., 2012). However, these models remain limited in their ability to assess the digitalisation of ergonomics practices within organisational settings. This constrains their applicability in increasingly digitalised manufacturing systems.

This research aims to adapt and operationalise an existing ergonomics maturity and culture assessment approach to account for the increasing role of digital technologies in manufacturing. Building on the EMM, this paper describes the initial development of an adapted maturity assessment model named Digitalised Ergonomics Maturity (DEM). The development of the DEM comprises role-based questionnaires and semi-structured interviews. Two questionnaires were developed: a full version targeting managerial and ergonomics roles, and a shortened version for operators and technical personnel. The former addresses organisational practices, decision-making, and strategic aspects, while the latter focuses on key operational elements, reflecting differences in roles and levels of insight, and improving clarity, relevance, and usability. Both use a five-level implementation scale and include a Likert-scale component to capture perceptions of ergonomics implementation, thereby enabling the calculation ofa maturity index.

The draft questionnaire was reviewed by 12 participants from academia and industry to assess clarity, relevance, and usability. All participants evaluated the full version, and four also assessed the shortened version. Feedback indicated that some statements were overly complex for non-experts, and that distinctions between maturity levels were not always clear. The role-based structure improved usability by reducing cognitive load and increasing relevance across respondent groups. Completion times were approximately 20 minutes for the full version and 10 minutes for the shortened version.

The final revised full version comprises 41 questions across three section saddressing organisational practices, performance indicators, and perceived implementation, while the shortened version comprises 21 questions and provides a condensed assessment of key dimensions of ergonomics practice and perception. Semi-structured interviews provide contextualised insights into ergonomics practices, including the use of digital tools, which facilitates triangulation and supports a more comprehensive assessment beyond questionnaire-based data.

The development and initial review of DEM, together with preliminary empirical findings, suggest its potential to support a differentiated assessment of ergonomics maturity across organisational levels, identify gaps between intended and actual practices, and assess maturity levels over time. DEM explicitly targets ongoing digitalisation of manufacturing systems, thereby supporting a more systematic integration of ergonomics into digitalised manufacturing systems and contributing to the realisation of human-centric principles central to Industry 5.0.

References:

Carayon, P., Wetterneck, T. B., Rivera-Rodriguez, A. J., Hundt, A. S., Hoonakker, P., Holden, R., & Gurses, A. P. (2014). Human factors systems approach to healthcare quality and patient safety. Applied Ergonomics, 45(1), 14–25. https://doi.org/10.1016/j.apergo.2013.04.023

Dul, J., Bruder, R., Buckle, P., Carayon, P., Falzon, P., Marras, W. S., Wilson, J. R., & van der Doelen, B. (2012). A strategy for human factors/ergonomics: developing the discipline and profession. Ergonomics, 55(4), 377–395. https://doi.org/10.1080/00140139.2012.661087

Fleming, M. (2001). Safety culture maturity model. Offshore Technology Report 2000/049. Keil Centre for HSE, UK. https://webarchive.nationalarchives.gov.uk/ukgwa/20230103120103/https://www.hse.gov.uk/research/otopdf/2000/oto00049.pdf

Hudson, P. T. W. (2001). Safety Management and Safety Culture: The Long, Hard and Winding Road. Occupational Health and Safety Management Systems (OHSMS): Proceedings of the First National Conference, 3–32.

Rodríguez, Y., Pérez, E., & Robertson, M. (2022). Ergonomic Maturity Model: A tool for integrating ergonomics/human factors into organizations. Work, 73(s1), S279–S292. https://doi.org/10.3233/WOR-211142

Ort, förlag, år, upplaga, sidor
Jönköping: JU – Jönköping University, in collaboration with NES – Nordic Ergonomics and Human Factors Society Conference, 2026
Nyckelord
Physical ergonomics, Digitalisation, Ergonomics maturity, Ergonomics integration, Manufacturing
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Processes in Intelligent Simulation, Manufacturing & Materials (PRISM); Socio-TEchnicAl SysteMs Engineering (STEAM)
Identifikatorer
urn:nbn:se:his:diva-27164 (URN)978-91-989295-4-6 (ISBN)
Konferens
Revitalizing Nordic Ergonomics for the Future: 53rd Nordic Ergonomics and Human Factors Society Conference (NES 2026), Jönköping – Sweden, October 21–23, 2026
Projekt
LITMUS: Leveraging Industry 4.0 Technologies for Human-Centric Sustainable ProductionAIRGO – AI-based digital tool for industrial ergonomics evaluations
Anmärkning

CC BY 4.0

Acknowledgements: Research supported by KK-Stiftelsen in the LITMUS and AIRGO projects.

Tillgänglig från: 2026-10-19 Skapad: 2026-10-19 Senast uppdaterad: 2026-10-20Bibliografiskt granskad
Quesada Díaz, R., Ballesteros Martín, Á., Luque Lineros, F. & Billing, E. (2026). Eye-Guided Human-Robot Collaborative Assembly: A Feasibility Study. In: Hajime Mizuyama; Eiji Morinaga; Tomomi Nonaka; Toshiya Kaihara; Gregor von Cieminski; David Romero (Ed.), Advances in Production Management Systems. Cyber-Physical-Human Production Systems: Human-AI Collaboration and Beyond: 44th IFIP WG 5.7 International Conference, APMS 2025, Kamakura, Japan, August 31-September 4, 2025, Proceedings, Part I. Paper presented at 44th IFIP WG 5.7 International Conference, APMS 2025, Kamakura, Japan, August 31 – September 4, 2025 (pp. 120-133). Cham: Springer
Öppna denna publikation i ny flik eller fönster >>Eye-Guided Human-Robot Collaborative Assembly: A Feasibility Study
2026 (Engelska)Ingår i: Advances in Production Management Systems. Cyber-Physical-Human Production Systems: Human-AI Collaboration and Beyond: 44th IFIP WG 5.7 International Conference, APMS 2025, Kamakura, Japan, August 31-September 4, 2025, Proceedings, Part I / [ed] Hajime Mizuyama; Eiji Morinaga; Tomomi Nonaka; Toshiya Kaihara; Gregor von Cieminski; David Romero, Cham: Springer, 2026, s. 120-133Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Collaboration between robots and human workers constitutes an important part of the shift towards human-centric production processes. While collaborative robots have increased flexibility and enabled compact production environments, real-time intent recognition and joint actions in human-robot collaboration (HRC) continue to pose challenges, particularly in dynamic target selection and coordination. Conventional HRC systems rely on manual inputs or predefined gestures. This study explores the feasibility of gaze-based interaction as a natural and intuitive control mechanism for close-proximity HRC in dynamic industrial settings. The approach is demonstrated in the form of a prototype workstation for wire harness assembly on a car bumper, where the human and the robot collaborate in real time using eye gaze-based dynamic target selection and tight action coordination. The human eye gaze was recorded in real-time using eye-tracking glasses, and the forward-facing scene camera of the glasses matched it to upcoming assembly targets for the robot. The system was evaluated based on detection accuracy and response time. Results indicate that the human eye gaze can constitute a powerful cue for robotic target selection and action coordination in HRC-based assembly. The YOLOv8-based object detection model achieved average target recognition confidence above 60%, despite sensitivity to lighting variations and dataset composition. These findings support the viability of gaze-based robotic control in industrial assembly, demonstrating its potential to enhance operator ergonomics, streamline task execution, and improve overall system responsiveness in dynamic work environments

Ort, förlag, år, upplaga, sidor
Cham: Springer, 2026
Serie
IFIP Advances in Information and Communication Technology, ISSN 1868-4238, E-ISSN 1868-422X ; 764
Nyckelord
Human-Robot Collaboration, Eye-Tracking, Proactive Eye Gaze (PEG), Computer Vision, Industrial Assembly
Nationell ämneskategori
Robotik och automation Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Virtual Production Development (VPD); Interaction Lab (ILAB)
Identifikatorer
urn:nbn:se:his:diva-25817 (URN)10.1007/978-3-032-03515-8_9 (DOI)001583355400009 ()2-s2.0-105015454648 (Scopus ID)978-3-032-03514-1 (ISBN)978-3-032-03517-2 (ISBN)978-3-032-03515-8 (ISBN)
Konferens
44th IFIP WG 5.7 International Conference, APMS 2025, Kamakura, Japan, August 31 – September 4, 2025
Projekt
EWASS - Empowering Human Workers for Assembly of Wire Harnesses
Forskningsfinansiär
Vinnova, 2022-01279
Anmärkning

First Online: 27 August 2025

Copyright Information: IFIP International Federation for Information Processing 2026

Hardcover ISBN 978-3-032-03514-1. Published: 24 August 2025

Softcover ISBN 978-3-032-03517-2. Due: 07 September 2026

eBook ISBN 978-3-032-03515-8. Published: 26 August 2025

The authors would like to thank the project partners and participants of EWASS. 

The present work was financially supported by the Swedish innovation agency Vinnova through the research and innovation programme Produktion2030, grant #2022-01279: Empowering Human Workers for Assembly of Wire Harnesses (EWASS)

Tillgänglig från: 2025-09-17 Skapad: 2025-09-17 Senast uppdaterad: 2026-05-21Bibliografiskt granskad
Quesada Díaz, R., Iriondo Pascual, A., Högberg, D., Bandaru, S. & Hanson, L. (2026). Supporting Ergonomics Evaluations in Manufacturing – A Comparison of Computer Vision- and IMU-Based Motion Capture. In: SPS 2026 - The 12th Swedish Production Symposium, 24/03/2026 - 26/03/2026, Luleå, Sweden: . Paper presented at SPS 2026 - The 12th Swedish Production Symposium, 24/03/2026 - 26/03/2026, Luleå, Sweden, Leading the transformation towards net zero industry. Institute of Physics Publishing (IOPP) (1), Article ID 012053.
Öppna denna publikation i ny flik eller fönster >>Supporting Ergonomics Evaluations in Manufacturing – A Comparison of Computer Vision- and IMU-Based Motion Capture
Visa övriga...
2026 (Engelska)Ingår i: SPS 2026 - The 12th Swedish Production Symposium, 24/03/2026 - 26/03/2026, Luleå, Sweden, Institute of Physics Publishing (IOPP), 2026, nr 1, artikel-id 012053Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Ergonomics evaluation methods are crucial for assessing risks for work-related musculoskeletal disorders and ensuring operator well-being, productivity, and safety. Despite the increased use of digital twins and AI-supported tools in production system design and operation, ergonomics evaluations still primarily rely on observational techniques such as expert assessments or checklist-based tools like the Rapid Entire Body Assessment and the Rapid Upper Limb Assessment. These methods are time-consuming, imprecise, and prone to subjectivity arising from variability in the judgment of the ergonomists and ambiguity in scoring criteria. As an alternative, ergonomics evaluation methods based on using technologies for direct measurements can provide semi-automation of the assessments and offer greater objectivity and precision. This study investigates the capability of a computer vision-based motion capture approach to support direct measurement ergonomics evaluations and compares its results with those of an inertial measurement unit-based system in an industrial task. The comparison was conducted by studying output data of the two systems and by feeding the data into a direct measurement-based ergonomics evaluation method. A representative industrial assembly task involving upper-body movement and dynamic wrist activity was recorded simultaneously using a single monocular RGB camera and an IMU-based system. Both datasets were processed using two parallel workflows that followed the same structure to extract joint angles and segment positions over time. The comparison and evaluation of the results demonstrates that computer vision-based motion capture has the potential to provide human posture and motion data suitable for direct measurement ergonomics evaluations in industrial environments.

Ort, förlag, år, upplaga, sidor
Institute of Physics Publishing (IOPP), 2026
Serie
IOP Conference Series: Materials Science and Engineering, ISSN 1757-8981, E-ISSN 1757-899X ; 1342
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Virtual Production Development (VPD); Användarcentrerad produktdesign; VF-KDO
Identifikatorer
urn:nbn:se:his:diva-26205 (URN)10.1088/1757-899x/1342/1/012053 (DOI)001803535300053 ()
Konferens
SPS 2026 - The 12th Swedish Production Symposium, 24/03/2026 - 26/03/2026, Luleå, Sweden, Leading the transformation towards net zero industry
Projekt
LITMUS: Leveraging Industry 4.0 Technologies for Human-Centric Sustainable ProductionAI Support and Digital Human Models for Time Data Management: TIMEBLY 2
Forskningsfinansiär
KK-stiftelsen, 2024-0013KK-stiftelsen, 2018-0011Vinnova, 202501012
Anmärkning

CC BY 4.0

E-mail: raquel.quesada.diaz@his.se

The authors acknowledge the financial support received from KK-Stiftelsen (The Knowledge Foundation, Stockholm, Sweden) through the Synergy programme for the research project LITMUS: Leveraging Industry 4.0 Technologies for Human-Centric Sustainable Production (grant #2024-0013), and from the research profile VF-KDO: Virtual factories with knowledge driven optimization at the University of Skövde (grant #2018-0011), and from Vinnova, Sweden’s Innovation Agency, through the Advanced Digitalization programme, for the project AI Support and Digital Human Models for Time Data Management: TIMEBLY 2 (grant #202501012).

Tillgänglig från: 2026-03-16 Skapad: 2026-03-16 Senast uppdaterad: 2026-08-28Bibliografiskt granskad
Quesada Díaz, R., Kedbäck, M. & Hedén, V. (2025). Designing robust assessment strategies for work-integrated learning in engineering education. In: Anna-Lena Göthberg; Cecilia Gillgren; Peter Fogel; Ulf Wilhelmsson; Jenny Lennartsson; Annie Jonsson (Ed.), DAL25 Proceedings: Det akademiska lärarskapet: Tema: Examination och bedömning. Paper presented at DAL25, Det akademiska lärarskapet, Examination och bedömning, Högskolan i Skövde den 25 april 2025. Skövde: Högskolan i Skövde
Öppna denna publikation i ny flik eller fönster >>Designing robust assessment strategies for work-integrated learning in engineering education
2025 (Engelska)Ingår i: DAL25 Proceedings: Det akademiska lärarskapet: Tema: Examination och bedömning / [ed] Anna-Lena Göthberg; Cecilia Gillgren; Peter Fogel; Ulf Wilhelmsson; Jenny Lennartsson; Annie Jonsson, Skövde: Högskolan i Skövde , 2025Konferensbidrag, Muntlig presentation med publicerat abstract (Övrigt vetenskapligt)
Abstract [en]

The integration of work-integrated learning (WIL) into engineering education offers unique opportunities to bridge theoretical knowledge with practical application, thereby enhancing student readiness for industry challenges. WIL fosters critical skills such as problem-solving, teamwork, and communication while providing direct exposure to industry standards and practices (Boud & Lee, 2005). However, it also presents significant challenges, particularly in the examination and assessment of student performance. This paper explores these challenges within the context of a redesigned Production System Design course conducted in collaboration with 11 partner companies as part of a broader initiative to strengthen industry-academia cooperation (Sengupta, 2020). 

The course involved real-world, company-specific projects addressing diverse industry needs, including logistics optimisation, total quality management (TQM), value stream mapping (VSM), product packaging redesign, and modifications to existing production lines. Students worked in small groups, spending a week on-site at the partner companies, applying theoretical concepts to propose solutions, with guidance from industrial supervisors who mentored without directly solving the problems. These projects enabled students to develop practical skills and gain valuable industry insights, aligning with the pedagogical goals of WIL and Work-Integrated Education (WIE) to create experiential learning opportunities (Cooper, Orrell, & Bowden, 2010). However, these benefits posed challenges in ensuring equitable and consistent project assessment. 

Key challenges included:

Diverse Project Scopes and Complexity: Each project varied in scope, complexity, and required competencies, making it difficult to establish uniform assessment criteria. This diversity raised concerns about the fairness of evaluations, as each group faced unique tasks, which complicated the establishment of standardised assessment frameworks (Jackson, 2015).

Balancing Academic and Industry Objectives: The dual accountability to academic grading standards and company expectations required a nuanced approach to assessment. Ensuring that student deliverables met industry needs and aligned with course learning outcomes required careful consideration to balance the academic and industry objectives (Bennet, 2018). 

Subjectivity in Evaluation: With input from both academic instructors and industrial supervisors, differences in evaluation perspectives often arose. These differences reflect varying expertise and priorities, complicated grading, and necessitating transparent mechanisms for reconciling these viewpoints (Boud & Molloy, 2013). 

Formative and Summative Feedback: Providing constructive feedback within the limited timeframe of the projects proved challenging, especially in balancing the academic and practical dimensions of the students’ work. The short duration often limited the opportunity for comprehensive formative feedback, an issue commonly noted in WIL programs (Grealish, 2013). Potential improvements may include extended feedback loops and digital tools for realtime input.

This paper explores these challenges and offers insights into developing more effective and equitable assessment strategies for WIL contexts. By addressing these issues, the findings contribute to advancing assessment practices in WIL initiatives, intending to strengthen industry-academia collaboration and improve engineering education outcomes.

 

References

Bennet, D. (2018). Graduate employability and higher education: Past, present and future. The Review of Higher Education, 5, 31-61.

Boud, D., & Lee, A. (2005). Promoting work-based learning through the development of a community of practice. International Journal of Engineering Education, 21(3), 514–523.

Boud, D., & Molloy, E. (2013). Rethinking models of feedback for learning: the challenge of design. Assessment & Evaluation in Higher Education, 38(6), 698-712.

Cooper, L., Orrell, J., & Bowden, M. (2010). Work-integrated learning: A guide to effective practice. Routledge.

Grealish, L. e. (2013). Barriers to effective feedback in work-integrated learning environments. Assessment & Evaluation in Higher Education, 38(1), 67-68.

Jackson, D. e. (2015). Industry engagement in work-integrated learning: Addressing the challenges of diverse projects and assessments. Journal of Education and Work, 28(4), 431–450.

Sengupta, S. e. (2020). Collaborative partnerships between industry and academia: A model for project-based learning. Journal of Engineering Education, 109(1), 32–44.

Ort, förlag, år, upplaga, sidor
Skövde: Högskolan i Skövde, 2025
Nationell ämneskategori
Pedagogik Pedagogiskt arbete Arbetslivsstudier
Forskningsämne
Virtual Production Development (VPD)
Identifikatorer
urn:nbn:se:his:diva-26059 (URN)
Konferens
DAL25, Det akademiska lärarskapet, Examination och bedömning, Högskolan i Skövde den 25 april 2025
Tillgänglig från: 2025-12-12 Skapad: 2025-12-12 Senast uppdaterad: 2026-08-11Bibliografiskt granskad
Kedbäck, M., Quesada Díaz, R. & Hedén, V. (2025). Didactic dilemmas in work-integrated learning in engineering education. In: Anna-Lena Göthberg; Cecilia Gillgren; Peter Fogel; Ulf Wilhelmsson; Jenny Lennartsson; Annie Jonsson (Ed.), DAL25 Proceedings: Det akademiska lärarskapet: Tema: Examination och bedömning. Paper presented at DAL25, Det akademiska lärarskapet, Examination och bedömning, Högskolan i Skövde den 25 april 2025. Skövde: Högskolan i Skövde
Öppna denna publikation i ny flik eller fönster >>Didactic dilemmas in work-integrated learning in engineering education
2025 (Engelska)Ingår i: DAL25 Proceedings: Det akademiska lärarskapet: Tema: Examination och bedömning / [ed] Anna-Lena Göthberg; Cecilia Gillgren; Peter Fogel; Ulf Wilhelmsson; Jenny Lennartsson; Annie Jonsson, Skövde: Högskolan i Skövde , 2025Konferensbidrag, Muntlig presentation med publicerat abstract (Övrigt vetenskapligt)
Abstract [en]

Work-based learning (WBL) in higher education presents both opportunities and challenges through a flexible curriculum provision (Costley, 2011). This paper explores didactic dilemmas encountered in the evaluation process in engineering education and how adjustments to the WBL model can improve both student learning outcomes and company engagement.

The study consisted of two implementation phases, each testing different approaches to WBL within an engineering programme. The first phase employed a trainee model where students participated in a six-week trainee period, spending one to two days per week at a manufacturing company. All students were assigned the same general task, despite being placed at different companies. To accommodate variation in company needs, the assignment included flexible options, allowing students to focus on what they deemed most relevant. However, this approach led to misalignment between company expectations and student work, which in turn led to difficult assessments of the students’ performance. Some companies believed students should have prioritised different tasks, and some of the students felt the need to undertake two separate projects – one fulfilling university learning objectives and another meeting company expectations.

Based on these findings, modifications were made in the second phase. The trainee period was shortened to one full-time week, and assignments were customised according to the specific needs of each participating company while still aligning with course learning objectives. The assignment design process involved extensive pre-implementation discussions with each company over several months. While this approach demanded greater university resources, it significantly improved both the assessment process as well as the experience for both students and companies; survey results highlighted the benefits of this tailored approach. In the second phase, 90 % of companies expressed willingness to participate in similar future projects (compared to 33 % in the first phase), and 100 % of the participating companies rated the students’ performance as “excellent” or “good”. The successful outcome of this approach was also shared by the students, as the survey results stated that 95.5 % of students would recommend this type of WBL experience to peers.

Conclusively, the results of the study underscore the importance of aligning assessment strategies with both academic learning objectives and industry expectations. While standardised assignments offer efficiency, they may not always meet the diverse needs of industry partners and students. Individualised assignments require greater preparation, but can enhance student learning and company satisfaction. This study provides valuable insights into the didactic dilemmas of assessing student work in WBL settings and offers a framework for refining assessment models to better serve all stakeholders involved.

 

References

Costley, C. (2011). The SAGE Handbook of Workplace Learning. SAGE Publications Ltd, https://doi.org/10.4135/9781446200940

Ort, förlag, år, upplaga, sidor
Skövde: Högskolan i Skövde, 2025
Nationell ämneskategori
Pedagogik Didaktik Pedagogiskt arbete Arbetslivsstudier
Forskningsämne
Virtual Production Development (VPD)
Identifikatorer
urn:nbn:se:his:diva-26075 (URN)
Konferens
DAL25, Det akademiska lärarskapet, Examination och bedömning, Högskolan i Skövde den 25 april 2025
Tillgänglig från: 2025-12-17 Skapad: 2025-12-17 Senast uppdaterad: 2026-08-11Bibliografiskt granskad
Legendi, M., Quesada Díaz, R., Grahn, G., Lamb, M. & Syberfeldt, A. (2025). Exploring Initial Perceptions of Industrial Collaborative Robots for Manual Assembly. In: Anna Syberfeldt; Amos Ng; Philippe Geril (Ed.), 23rd International Industrial Simulation Conference, ISC 2025: . Paper presented at 23rd International Industrial Simulation Conference, ISC 2025, June 3-5, 2025, University of Skövde, Sweden (pp. 94-101). EUROSIS
Öppna denna publikation i ny flik eller fönster >>Exploring Initial Perceptions of Industrial Collaborative Robots for Manual Assembly
Visa övriga...
2025 (Engelska)Ingår i: 23rd International Industrial Simulation Conference, ISC 2025 / [ed] Anna Syberfeldt; Amos Ng; Philippe Geril, EUROSIS , 2025, s. 94-101Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Industry 5.0 advocates a human-centric approach where humans play a central role in the design and implementation of industrial technologies. Collaborative robots, with their adjustable safety functions, are key enabling technologies in this paradigm, especially for manual assembly tasks. This study investigates initial trust in collaborative robots by examining whether familiarization through virtual reality (VR) influences the applicability of various trust-related factors. Two groups of university engineering students participated: an Online group that evaluated the factors based solely on images and provided general information, and an In-Person group that engaged in a VR interaction with the robot before evaluation. Participants were asked to assess whether they found factors such as safety, usability, competence, predictability, and adaptability applicable to the robots, selecting "Yes", "No", or "I don’t know". In a follow-up question, they were then asked to rate each factor on a 5-point Likert scale. Results indicate that the In-Person group more frequently affirmed the applicability of the factors. Limitations include the use of only positively framed statements and the participants’ prior experience with industrial and collaborative robots. 

Ort, förlag, år, upplaga, sidor
EUROSIS, 2025
Nyckelord
Human-Robot Collaboration (HRC), Industry 5.0, Manual Assembly, Trust in robotics, Virtual Reality (VR), Assembly, Collaborative robots, Engineering education, Industrial robots, Industry 4.0, Man machine systems, Safety engineering, Design and implementations, Human-centric, Human-robot collaboration, Industrial-technology, Trust in robotic, Virtual reality
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi Robotik och automation
Forskningsämne
Virtual Production Development (VPD); Interaction Lab (ILAB)
Identifikatorer
urn:nbn:se:his:diva-25710 (URN)2-s2.0-105011599413 (Scopus ID)978-94-92859-35-8 (ISBN)
Konferens
23rd International Industrial Simulation Conference, ISC 2025, June 3-5, 2025, University of Skövde, Sweden
Anmärkning

© 2025 EUROSIS-ETI

Tillgänglig från: 2025-08-11 Skapad: 2025-08-11 Senast uppdaterad: 2026-07-07Bibliografiskt granskad
Billing, E., Brolin, A., Quesada Díaz, R., Eklund, M. & Lämkull, D. (2024). Predicting repetitive worker behaviour using eye-gaze. In: Silje-Adelen Nenseth; Ruud van der Weel; Audrey van der Meer (Ed.), Studies in Perception and Action XVII: 22nd International Conference on Perception and Action. Paper presented at The XXII International Conference on Perception and Action (ICPA), June 25-28, 2024 Trondheim, Norway (pp. 4-4). Trondheim
Öppna denna publikation i ny flik eller fönster >>Predicting repetitive worker behaviour using eye-gaze
Visa övriga...
2024 (Engelska)Ingår i: Studies in Perception and Action XVII: 22nd International Conference on Perception and Action / [ed] Silje-Adelen Nenseth; Ruud van der Weel; Audrey van der Meer, Trondheim, 2024, s. 4-4Konferensbidrag, Poster (med eller utan abstract) (Refereegranskat)
Ort, förlag, år, upplaga, sidor
Trondheim: , 2024
Nationell ämneskategori
Psykologi Datorgrafik och datorseende
Forskningsämne
Interaction Lab (ILAB); Användarcentrerad produktdesign; Virtual Production Development (VPD)
Identifikatorer
urn:nbn:se:his:diva-24264 (URN)
Konferens
The XXII International Conference on Perception and Action (ICPA), June 25-28, 2024 Trondheim, Norway
Projekt
Empowering Human Workers for Assembly of Wire Harnesses (EWASS)
Forskningsfinansiär
Vinnova, 2022-01279
Anmärkning

CC BY-NC-ND 4.0

The present work was financially supported by the Swedish innovation agency Vinnova through the research and innovation programme Produktion2030, grant #2022-01279: Empowering Human Workers for Assembly of Wire Harnesses (EWASS)

Tillgänglig från: 2024-07-08 Skapad: 2024-07-08 Senast uppdaterad: 2025-09-29Bibliografiskt granskad
Billing, E., Quesada Díaz, R., Eklund, M. & Brolin, A. (2024). Proactive eye-gaze for predicting repetitive worker behavior. In: Jonas Olofsson; Teodor Jernsäther-Ohlsson; Sofia Thunberg; Linus Holm; Erik Billing (Ed.), Proceedings of the 19th SweCog Conference: . Paper presented at Annual conference of the Swedish Cognitive Science Society (SweCog), Stockholm, October 10-11, 2024 (pp. 151-154). Skövde: University of Skövde, Article ID P57.
Öppna denna publikation i ny flik eller fönster >>Proactive eye-gaze for predicting repetitive worker behavior
2024 (Engelska)Ingår i: Proceedings of the 19th SweCog Conference / [ed] Jonas Olofsson; Teodor Jernsäther-Ohlsson; Sofia Thunberg; Linus Holm; Erik Billing, Skövde: University of Skövde , 2024, s. 151-154, artikel-id P57Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Proactive eye-gaze (PEG) is a behavioural pattern where eye fixations precede actions, such as reaching. With the proliferation of eye-tracking technology, PEG shows promise for predicting human actions, which has many applications, for example, within industrial human-robot collaboration (HRC). This study investigates PEG in repetitive assembly tasks. Eye-tracking data from four experienced workers were recorded and analysed. The study recorded 57 assembly sessions, identifying 3793 fixations, of which 35% were proactive gazes. The mean PEG interval was 795 ms. Contrary to the hypothesis, PEG was found to be as strong, if not stronger, in repetitive tasks compared to previous studies investigating PEG in other contexts. These findings suggest PEG could be a reliable predictor of worker actions in repetitive tasks, enhancing coordination in HRC.

Ort, förlag, år, upplaga, sidor
Skövde: University of Skövde, 2024
Serie
Skövde University Studies in Informatics: SUSI, ISSN 1653-2325 ; 2024:1
Nationell ämneskategori
Människa-datorinteraktion (interaktionsdesign) Datorgrafik och datorseende Psykologi (exklusive tillämpad psykologi)
Forskningsämne
Interaction Lab (ILAB); Virtual Production Development (VPD); Användarcentrerad produktdesign
Identifikatorer
urn:nbn:se:his:diva-24711 (URN)978-91-989038-1-2 (ISBN)
Konferens
Annual conference of the Swedish Cognitive Science Society (SweCog), Stockholm, October 10-11, 2024
Projekt
EWASS - Empowering Human Workers for Assembly of Wire Harnesses
Forskningsfinansiär
Vinnova, 2022-01279
Tillgänglig från: 2024-11-19 Skapad: 2024-11-19 Senast uppdaterad: 2025-09-29Bibliografiskt granskad
Quesada Díaz, R. & Syberfeldt, A. (2022). Optimised Shop-Floor Operator Support on an Integrated AR and PLM Framework for Remanufacturing. In: Amos H. C. Ng; Anna Syberfeldt; Dan Högberg; Magnus Holm (Ed.), SPS2022: Proceedings of the 10th Swedish Production Symposium. Paper presented at 10th Swedish Production Symposium (SPS2022), Skövde, April 26–29 2022 (pp. 425-434). Amsterdam; Berlin; Washington, DC: IOS Press
Öppna denna publikation i ny flik eller fönster >>Optimised Shop-Floor Operator Support on an Integrated AR and PLM Framework for Remanufacturing
2022 (Engelska)Ingår i: SPS2022: Proceedings of the 10th Swedish Production Symposium / [ed] Amos H. C. Ng; Anna Syberfeldt; Dan Högberg; Magnus Holm, Amsterdam; Berlin; Washington, DC: IOS Press, 2022, s. 425-434Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Product disassembly and inspection are essential operations in a sustainable product life cycle, particularly in end-of-life strategies such as remanufacturing. This study identifies critical aspects of usability of a framework that supports the remanufacturing process and its operators. Two of the challenges faced by operators in remanufacturing are the number of product variants and quality decisions. As a result of these, the performance time and the number of errors committed increase. The integration of Augmented Reality (AR), product lifecycle management and expert systems increase the efficiency of managing stored data and supports the remanufacturing process and its operators. A head-mounted display has been used to run the application, allowing the operator to take it right to the working area. The information displayed during the manufacturing processes includes CAD models or images of the industrial equipment and its components and dynamic information, providing clear instructions easy to follow during the remanufacturing process. The proposed methodologic approach uses the concept of rule-based Expert Systems to determine the information content that is dynamically displayed on the AR device and to optimise the route that should be followed in remanufacturing operations. A pilot testing was done to assess the functional suitability of the final AR application to support the delivery of dynamic information in its final industrial environment. The evaluation was done in a real-working environment selecting the assembly, disassembly and inspection operations as a base. A questionnaire to measure the usability of the system was provided to the test subjects after the testing. The results from the questionnaire show a positive perception of the usability of the framework. According to the result analysis, the framework has high usability and can reduce errors and impaired decision-making.

Ort, förlag, år, upplaga, sidor
Amsterdam; Berlin; Washington, DC: IOS Press, 2022
Serie
Advances in Transdisciplinary Engineering, ISSN 2352-751X, E-ISSN 2352-7528 ; 21
Nyckelord
Augmented Reality, Product lifecycle management, Sustainability, Remanufacturing, Industry 4.0
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Produktion och automatiseringsteknik; VF-KDO
Identifikatorer
urn:nbn:se:his:diva-21104 (URN)10.3233/ATDE220161 (DOI)001191233200036 ()2-s2.0-85132797623 (Scopus ID)978-1-64368-268-6 (ISBN)978-1-64368-269-3 (ISBN)
Konferens
10th Swedish Production Symposium (SPS2022), Skövde, April 26–29 2022
Anmärkning

CC BY-NC 4.0

Corresponding Author: Raquel.quesada.diaz@his.se

Tillgänglig från: 2022-05-02 Skapad: 2022-05-02 Senast uppdaterad: 2025-09-29Bibliografiskt granskad
Quesada Díaz, R. & Syberfeldt, A. (2019). Product Disassembly and Inspection Supported by Augmented Reality and Product Lifecycle Management Integration. In: Yan Jin, Mark Price (Ed.), Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, September 10–12, 2019, Queen’s University Belfast, UK. Paper presented at 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10–12 September 2019, Queen’s University, Belfast, UK (pp. 553-558). Amsterdam: IOS Press, 9
Öppna denna publikation i ny flik eller fönster >>Product Disassembly and Inspection Supported by Augmented Reality and Product Lifecycle Management Integration
2019 (Engelska)Ingår i: Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, September 10–12, 2019, Queen’s University Belfast, UK / [ed] Yan Jin, Mark Price, Amsterdam: IOS Press, 2019, Vol. 9, s. 553-558Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Product disassembly and inspection are essential operations in a sustainable product life cycle, particularly in end-of-life strategies such as remanufacturing. This study describes the most frequent issues and outcomes that can be encountered during the implementation of a framework for the integration of technologies such as augmented reality, product identifiers and product lifecycle management in the context of disassembly and inspection. It is believed that the development of such framework could provide a secure, efficient management of stored data and a comprehensive support to the work process and the operators carrying out the disassembly and inspection.

Ort, förlag, år, upplaga, sidor
Amsterdam: IOS Press, 2019
Serie
Advances in Transdisciplinary Engineering, ISSN 2352-751X, E-ISSN 2352-7528 ; 9
Nyckelord
Augmented reality, Product Lifecycle Management, Sustainability, Remanufacturing, PEID
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Produktion och automatiseringsteknik
Identifikatorer
urn:nbn:se:his:diva-18039 (URN)10.3233/ATDE190096 (DOI)978-1-64368-008-8 (ISBN)978-1-64368-009-5 (ISBN)
Konferens
17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10–12 September 2019, Queen’s University, Belfast, UK
Tillgänglig från: 2019-12-28 Skapad: 2019-12-28 Senast uppdaterad: 2025-09-29Bibliografiskt granskad
Organisationer
Identifikatorer
ORCID-id: ORCID iD iconorcid.org/0000-0002-9268-8628

Sök vidare i DiVA

Visa alla publikationer