his.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
A closed-form solution to statically indeterminate adhesive joint problems — exemplified on ELS-specimens
Högskolan i Skövde, Institutionen för teknik och samhälle.
Högskolan i Skövde, Institutionen för teknik och samhälle.
2008 (Engelska)Ingår i: International Journal of Adhesion and Adhesives, ISSN 0143-7496, E-ISSN 1879-0127, Vol. 28, nr 7, s. 350-361Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

A beam/adhesive-layer model is developed. For this model a closed-form solution method applicable to arbitrary boundary conditions is presented. This enables the solution of a large number of practical problems which may be statically indeterminate. The stress state in the adhesive layer and the adherends of the beam/adhesive-layer model is also scrutinized. The method is exemplified in an analysis of the end-loaded split (ELS) specimen, commonly used to determine fracture energies of adhesive layers. The effect of the flexibility of the adhesive layer on the energy release rate and the critical crack length for stable crack growth is examined. Both symmetric and unsymmetric ELS-specimens are studied.

Ort, förlag, år, upplaga, sidor
Elsevier, 2008. Vol. 28, nr 7, s. 350-361
Nyckelord [en]
C. Fracture mechanics, C. Stress analysis, C. Joint design, Beam/adhesive-layer model
Nationell ämneskategori
Den kondenserade materiens fysik
Identifikatorer
URN: urn:nbn:se:his:diva-2528DOI: 10.1016/j.ijadhadh.2007.10.002ISI: 000256843700003Scopus ID: 2-s2.0-42949137074OAI: oai:DiVA.org:his-2528DiVA, id: diva2:134070
Tillgänglig från: 2009-01-16 Skapad: 2009-01-16 Senast uppdaterad: 2017-12-14Bibliografiskt granskad
Ingår i avhandling
1. Mixed mode loaded adhesive layers: from measurement of material data to analysis of structural behaviour
Öppna denna publikation i ny flik eller fönster >>Mixed mode loaded adhesive layers: from measurement of material data to analysis of structural behaviour
2007 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

In manufacturing of multi-material products, a joining method that is able to cost-effectively assemble components made of dissimilar and similar material, with irregular geometries, is optimal. As an alternative, adhesive bonding is in-creasingly adapted by the industry, which is also used in manufacturing of multi-phase materials. In practice, adhesives are constrained to thin layers. An adhesive as a constrained layer behaves differently compared to the adhesive as a bulk material. In general, adhesive layers are loaded in peel (mode I), or in shear (mode II or III), or in a combination of peel and shear (mixed mode). This thesis deals with mixed mode loaded adhesive layers, from measurement of ma-terial data to analysis of structural behaviour. For studying of structural behaviour of adhesive joints, an integrated approach is developed. Arbitrarily end-loaded single-layer adhesive joints with arbitrary ad-herends of arbitrary length are analysed with the Beam/Adhesive layer (B/A) model. Closed-form solutions are obtained for the adhesive layer as well as for the adherends. For joints with a semi-infinite symmetric geometry, i.e. relative long joints with identical adherends loaded at one end, basic loading cases are obtained. Solutions to these basic loading cases are easy to use in designing of joints with this type of geometry. For nonlinear or general adhesive layers, a mode-dependent cohesive law is de-veloped. The normalized formulation is easy to implement in numerical simula-tions, yet, it captures the characteristics of adhesive layers. For experimental studies, this cohesive law is used to obtain the constitutive behaviour of an adhe-sive layer. The results confirm the ability and suitability of this cohesive law in modelling of adhesive layers. To obtain material data of adhesive layers, experimental methods are developed based on the J-integral. Two specimens, the Mixed mode double Cantilever Beams (MCB) specimen and the Unbalanced Double Cantilever Beams (UDCB) specimen, are designed to allow adhesive layers to be loaded in mixed mode. The MCB-specimen is implemented experimentally and the constitutive behav-iour of the tested adhesive layer is obtained.

Ort, förlag, år, upplaga, sidor
Chalmers tekniska högskola, 2007. s. 17
Serie
Doktorsavhandlingar vid Chalmers tekniska högskola, ISSN 0346-718X ; 2572
Nyckelord
adhesive layer, mixed mode testing, cohesive law, J-integral
Nationell ämneskategori
Maskinteknik
Forskningsämne
Teknik
Identifikatorer
urn:nbn:se:his:diva-2039 (URN)978-91-7291-891-7 (ISBN)
Disputation
(Engelska)
Tillgänglig från: 2008-05-09 Skapad: 2008-05-09 Senast uppdaterad: 2017-11-27

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Alfredsson, SvanteHögberg, Jia Li

Sök vidare i DiVA

Av författaren/redaktören
Alfredsson, SvanteHögberg, Jia Li
Av organisationen
Institutionen för teknik och samhälle
I samma tidskrift
International Journal of Adhesion and Adhesives
Den kondenserade materiens fysik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 1331 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf