his.sePublikasjoner
Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Energy release rate and mode-mixity of adhesive joint specimens
Högskolan i Skövde, Institutionen för teknik och samhälle.
Högskolan i Skövde, Institutionen för kommunikation och information.
2007 (engelsk)Inngår i: International Journal of Fracture, ISSN 0376-9429, E-ISSN 1573-2673, Vol. 144, nr 4, s. 267-283Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Fracture behaviour of adhesive joints under mixed mode loading is analysed by using the beam/adhesive-layer (b/a) model, in which, the adherends are beamlike and the adhesive is constrained to a thin flexible layer between the adherends. The adhesive layer deforms in peel (mode I), in shear (mode II) or in a combination of peel and shear (mixed mode). Macroscopically, the ends of the bonded part of the joints can be considered as crack tips. The energy release rate of a single-layer adhesive joint is then formulated as a function of the crack tip deformation and the mode-mixity is defined by the shear portion of the total energy release rate. The effects of transversal forces and the flexibility of the adhesive layer are included in the b/a-model, which can be applied to joints with short crack length as well as short bonding length. The commonly used end-loaded unsymmetric semi-infinite joints are examined and closed-form solutions are given. In comparison to the singular-field model in the context of linear elastic fracture mechanics, the b/a-model replaces the singularity at the crack tip with a stress concentration zone. It is shown that the b/a-model and the singular-field model yield fundamentally different mode-mixities for unsymmetric systems. The presented closed-form b/a-model solutions facilitates parametric studies of the influence of unbalance in loading, unsymmetry of the adherends, as well as the flexibility of the adhesive layer, on the mode mixity of an adhesive joint.

sted, utgiver, år, opplag, sider
Springer, 2007. Vol. 144, nr 4, s. 267-283
Emneord [en]
Adhesive layer, Fracture, Energy release rate, Mode-mixity, Beam model
Identifikatorer
URN: urn:nbn:se:his:diva-2149DOI: 10.1007/s10704-007-9099-9ISI: 000248978100004OAI: oai:DiVA.org:his-2149DiVA, id: diva2:32425
Tilgjengelig fra: 2008-06-09 Laget: 2008-06-09 Sist oppdatert: 2017-12-12bibliografisk kontrollert
Inngår i avhandling
1. Mixed mode loaded adhesive layers: from measurement of material data to analysis of structural behaviour
Åpne denne publikasjonen i ny fane eller vindu >>Mixed mode loaded adhesive layers: from measurement of material data to analysis of structural behaviour
2007 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

In manufacturing of multi-material products, a joining method that is able to cost-effectively assemble components made of dissimilar and similar material, with irregular geometries, is optimal. As an alternative, adhesive bonding is in-creasingly adapted by the industry, which is also used in manufacturing of multi-phase materials. In practice, adhesives are constrained to thin layers. An adhesive as a constrained layer behaves differently compared to the adhesive as a bulk material. In general, adhesive layers are loaded in peel (mode I), or in shear (mode II or III), or in a combination of peel and shear (mixed mode). This thesis deals with mixed mode loaded adhesive layers, from measurement of ma-terial data to analysis of structural behaviour. For studying of structural behaviour of adhesive joints, an integrated approach is developed. Arbitrarily end-loaded single-layer adhesive joints with arbitrary ad-herends of arbitrary length are analysed with the Beam/Adhesive layer (B/A) model. Closed-form solutions are obtained for the adhesive layer as well as for the adherends. For joints with a semi-infinite symmetric geometry, i.e. relative long joints with identical adherends loaded at one end, basic loading cases are obtained. Solutions to these basic loading cases are easy to use in designing of joints with this type of geometry. For nonlinear or general adhesive layers, a mode-dependent cohesive law is de-veloped. The normalized formulation is easy to implement in numerical simula-tions, yet, it captures the characteristics of adhesive layers. For experimental studies, this cohesive law is used to obtain the constitutive behaviour of an adhe-sive layer. The results confirm the ability and suitability of this cohesive law in modelling of adhesive layers. To obtain material data of adhesive layers, experimental methods are developed based on the J-integral. Two specimens, the Mixed mode double Cantilever Beams (MCB) specimen and the Unbalanced Double Cantilever Beams (UDCB) specimen, are designed to allow adhesive layers to be loaded in mixed mode. The MCB-specimen is implemented experimentally and the constitutive behav-iour of the tested adhesive layer is obtained.

sted, utgiver, år, opplag, sider
Chalmers tekniska högskola, 2007. s. 17
Serie
Doktorsavhandlingar vid Chalmers tekniska högskola, ISSN 0346-718X ; 2572
Emneord
adhesive layer, mixed mode testing, cohesive law, J-integral
HSV kategori
Forskningsprogram
Teknik
Identifikatorer
urn:nbn:se:his:diva-2039 (URN)978-91-7291-891-7 (ISBN)
Disputas
(engelsk)
Tilgjengelig fra: 2008-05-09 Laget: 2008-05-09 Sist oppdatert: 2017-11-27

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekst

Personposter BETA

Alfredsson, SvanteHögberg, J. Li

Søk i DiVA

Av forfatter/redaktør
Alfredsson, SvanteHögberg, J. Li
Av organisasjonen
I samme tidsskrift
International Journal of Fracture

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 1309 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf