his.sePublikationer
Ändra sökning
Länk till posten
Permanent länk

Direktlänk
BETA
Publikationer (10 of 38) Visa alla publikationer
Thorvald, P., Lindblom, J. & Kolbeinsson, A. (2020). Embodied Interactions in Cognitive Manufacturing. In: Hasan Ayaz (Ed.), Advances in Neuroergonomics and Cognitive Engineering: Proceedings of the AHFE 2019 International Conference on Neuroergonomics and Cognitive Engineering, and the AHFE International Conference on Industrial Cognitive Ergonomics and Engineering Psychology, July 24-28, 2019, Washington D.C., USA. Paper presented at International Conference on Applied Human Factors and Ergonomics (AHFE), Washington D.C, USA, 24-28 July, 2019 (pp. 419-426). Springer
Öppna denna publikation i ny flik eller fönster >>Embodied Interactions in Cognitive Manufacturing
2020 (Engelska)Ingår i: Advances in Neuroergonomics and Cognitive Engineering: Proceedings of the AHFE 2019 International Conference on Neuroergonomics and Cognitive Engineering, and the AHFE International Conference on Industrial Cognitive Ergonomics and Engineering Psychology, July 24-28, 2019, Washington D.C., USA / [ed] Hasan Ayaz, Springer, 2020, s. 419-426Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

This paper presents a discussion on the role of embodied interaction with a basis in social embodiment effects and how they can be viewed in light of manufacturing ergonomics. The social embodiment effects are four statements, grounded in empirical findings, which highlight the interplay of social stimuli, embodied responses, and cognitive processing. They suggest and base an argument for how embodiment is central to cognitive processing, how bodily states interact extensively with cognitive states, and ultimately how embodied interaction is ubiquitous in human cognition. The paper further presents a view on how human based manufacturing can be studied in light of this argument, exploring other areas where social embodiment has been further researched, with an aim to suggest examples of where social embodiment effects might be found in manufacturing ergonomics and form a basis for future investigations. 

Ort, förlag, år, upplaga, sidor
Springer, 2020
Serie
Advances in Intelligent Systems and Computing, ISSN 2194-5357, E-ISSN 2194-5365 ; 953
Nyckelord
Human based manufacturing·ergonomics, Manufacturing, Social embodiment·cognition, Economic and social effects, Manufacture, Cognitive processing, Cognitive state, Embodied interaction, Empirical findings, Human cognition, Ergonomics
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Användarcentrerad produktdesign; Interaction Lab (ILAB)
Identifikatorer
urn:nbn:se:his:diva-17416 (URN)10.1007/978-3-030-20473-0_41 (DOI)000502759200041 ()2-s2.0-85067652021 (Scopus ID)978-3-030-20472-3 (ISBN)978-3-030-20473-0 (ISBN)
Konferens
International Conference on Applied Human Factors and Ergonomics (AHFE), Washington D.C, USA, 24-28 July, 2019
Tillgänglig från: 2019-07-09 Skapad: 2019-07-09 Senast uppdaterad: 2020-01-03Bibliografiskt granskad
Mattsson, S., Fast-Berglund, Å., Li, D. & Thorvald, P. (2020). Forming a cognitive automation strategy for Operator 4.0 in complex assembly. Computers & industrial engineering, 139, Article ID 105360.
Öppna denna publikation i ny flik eller fönster >>Forming a cognitive automation strategy for Operator 4.0 in complex assembly
2020 (Engelska)Ingår i: Computers & industrial engineering, ISSN 0360-8352, E-ISSN 1879-0550, Vol. 139, artikel-id 105360Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Due to today’s technological advances in the area of Industry 4.0, having a strategy for cognitive automation solutions is crucial. Operator 4.0, will have handle and manage different work tasks ranging from learning new tasks to solving difficult problems and initiate changes. To support the operator moving between these tasks a strategy for the design of cognitive automation solutions is needed. The suggested strategy has three steps: 1) select assembly phases, 2) choose level of cognitive automation carrier and 3) suggest cognitive automation content. It is important that the operator is part of the design and that the solution supports movement between the phases learning, operational and disruptive phases. The strategy could support manufacturing companies meeting challenges regarding social sustainability e.g. stress, attractive workplaces and demography changes as well as system transparency and complexity.

Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Användarcentrerad produktdesign; INF202 Virtual Ergonomics
Identifikatorer
urn:nbn:se:his:diva-16052 (URN)10.1016/j.cie.2018.08.011 (DOI)2-s2.0-85052131966 (Scopus ID)
Tillgänglig från: 2018-08-16 Skapad: 2018-08-16 Senast uppdaterad: 2020-01-09Bibliografiskt granskad
Thorvald, P., Lindblom, J. & Andreasson, R. (2019). On the development of a method for cognitive load assessment in manufacturing. Robotics and Computer-Integrated Manufacturing, 59, 252-266
Öppna denna publikation i ny flik eller fönster >>On the development of a method for cognitive load assessment in manufacturing
2019 (Engelska)Ingår i: Robotics and Computer-Integrated Manufacturing, ISSN 0736-5845, E-ISSN 1879-2537, Vol. 59, s. 252-266Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The increasing complexity and demands of assembly operations in manufacturing has been shown to lead to increased cognitive load in assembly workers. Previous work has outlined the complexity of an assembly worker's situation both in terms of difficulty and speed of work and there have been a few attempts at creating frameworks and methods for understanding the key aspects of what creates increased cognitive load. This paper presents the development of an analytic method, denoted CLAM (Cognitive Load Assessment for Manufacturing), and a tool for assessing cognitive load in manufacturing, primarily assembly. It outlines the journey of the development as well as discusses and problematizes relevant meta-methodological issues paired with method development. The intended contribution of the work is to make a difference in reducing the cognitive load of assembly workers on the shop floor, thus focusing the development on applicability and usability of the tool in practice. With this purpose in mind, focus of the method development has been on the practitioners, i.e. the method should not require any expert knowledge to be applied. The CLAM method and accompanying documentation such as a handbook containing instructions towards using the method and interpreting the results, is available in an online tool.

Ort, förlag, år, upplaga, sidor
Elsevier, 2019
Nyckelord
Cognitive load, Manufacturing, Assembly, Method development, CLAM method
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi Interaktionsteknik
Forskningsämne
Interaction Lab (ILAB); Användarcentrerad produktdesign
Identifikatorer
urn:nbn:se:his:diva-16863 (URN)10.1016/j.rcim.2019.04.012 (DOI)000472694400022 ()2-s2.0-85064707617 (Scopus ID)
Projekt
Sense&React
Forskningsfinansiär
EU, FP7, Sjunde ramprogrammet, FP7-314350
Tillgänglig från: 2019-05-03 Skapad: 2019-05-03 Senast uppdaterad: 2019-09-30Bibliografiskt granskad
Thorvald, P. & Case, K. (Eds.). (2018). Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, Incorporating the 33rd National Conference on Manufacturing Research, September 11-13, 2018, University of Skövde, Sweden. Paper presented at International Conference on Manufacturing Research 2018, September 11-13, 2018, University of Skövde, Sweden. Amsterdam: IOS Press
Öppna denna publikation i ny flik eller fönster >>Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, Incorporating the 33rd National Conference on Manufacturing Research, September 11-13, 2018, University of Skövde, Sweden
2018 (Engelska)Proceedings (redaktörskap) (Refereegranskat)
Ort, förlag, år, upplaga, sidor
Amsterdam: IOS Press, 2018. s. 535
Serie
Advances in Transdisciplinary Engineering, ISSN 2352-751X, E-ISSN 2352-7528 ; 8
Nationell ämneskategori
Maskinteknik
Forskningsämne
Användarcentrerad produktdesign; INF202 Virtual Ergonomics
Identifikatorer
urn:nbn:se:his:diva-16204 (URN)978-1-61499-901-0 (ISBN)978-1-61499-902-7 (ISBN)
Konferens
International Conference on Manufacturing Research 2018, September 11-13, 2018, University of Skövde, Sweden
Tillgänglig från: 2018-09-14 Skapad: 2018-09-14 Senast uppdaterad: 2019-02-14Bibliografiskt granskad
Fast-Berglund, Å., Thorvald, P., Billing, E., Palmquist, A., Romero, D. & Weichhart, G. (2018). Conceptualizing Embodied Automation to Increase Transfer of Tacit knowledge in the Learning Factory. In: Ricardo Jardim-Gonçalves, João Pedro Mendonça, Vladimir Jotsov, Maria Marques, João Martins, Robert Bierwolf (Ed.), "Theory, Research and Innovation in Applications": 9th International Conference on Intelligent Systems 2018 (IS’18). Paper presented at 2018 International Conference on Intelligent Systems (IS), Funchal - Madeira, Portugal, September 25-27 2018 (pp. 358-364). IEEE, Article ID 8710482.
Öppna denna publikation i ny flik eller fönster >>Conceptualizing Embodied Automation to Increase Transfer of Tacit knowledge in the Learning Factory
Visa övriga...
2018 (Engelska)Ingår i: "Theory, Research and Innovation in Applications": 9th International Conference on Intelligent Systems 2018 (IS’18) / [ed] Ricardo Jardim-Gonçalves, João Pedro Mendonça, Vladimir Jotsov, Maria Marques, João Martins, Robert Bierwolf, IEEE, 2018, s. 358-364, artikel-id 8710482Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

This paper will discuss how cooperative agent-based systems, deployed with social skills and embodied automation features, can be used to interact with the operators in order to facilitate sharing of tacit knowledge and its later conversion into explicit knowledge. The proposal is to combine social software robots (softbots) with industrial collaborative robots (co-bots) to create a digital apprentice for experienced operators in human- robot collaboration workstations. This is to address the problem within industry that experienced operators have difficulties in explaining how they perform their tasks and later, how to turn this procedural knowledge (knowhow) into instructions to be shared among other operators. By using social softbots and co-bots, as cooperative agents with embodied automation features, we think we can facilitate the ‘externalization’ of procedural knowledge in human-robot interaction(s). This enabled by the capabilities of social cooperative agents with embodied automation features of continuously learning by looking over the shoulder of the operators, and documenting and collaborating with them in a non-intrusive way as they perform their daily tasks. 

Ort, förlag, år, upplaga, sidor
IEEE, 2018
Serie
IEEE Intelligent Systems, ISSN 1541-1672, E-ISSN 1941-1294
Nyckelord
Embodied Automation, Agent-based Systems, Robot Systems, Collaborative Robots, Co-Bots, Software Robots, Softbots, Social Robots, Knowledge, Transfer, Tacit, Knowledge, Game-based, Activities, Motivation
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Användarcentrerad produktdesign; Interaction Lab (ILAB); INF202 Virtual Ergonomics; INF302 Autonoma intelligenta system
Identifikatorer
urn:nbn:se:his:diva-16264 (URN)10.1109/IS.2018.8710482 (DOI)000469337900052 ()2-s2.0-85065958046 (Scopus ID)978-1-5386-7097-2 (ISBN)978-1-5386-7098-9 (ISBN)
Konferens
2018 International Conference on Intelligent Systems (IS), Funchal - Madeira, Portugal, September 25-27 2018
Anmärkning

2018 Intelligent Systems: Theory, Research and Innovation in Applications, Madeira Island, Portugal 25-27 September 2018

Tillgänglig från: 2018-10-01 Skapad: 2018-10-01 Senast uppdaterad: 2020-01-08Bibliografiskt granskad
Brolin, A., Case, K. & Thorvald, P. (2018). Interaction Effects Affecting Human Performance in Manual Assembly. In: Peter Thorvald, Keith Case (Ed.), Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, September 11–13, 2018, University of Skövde, Sweden. Paper presented at 16th International Conference on Manufacturing Research (ICMR), incorporating the 33rd National Conference on Manufacturing Research, September 11–13, 2018, University of Skövde, Sweden (pp. 265-270). Amsterdam, Netherlands: IOS Press
Öppna denna publikation i ny flik eller fönster >>Interaction Effects Affecting Human Performance in Manual Assembly
2018 (Engelska)Ingår i: Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, September 11–13, 2018, University of Skövde, Sweden / [ed] Peter Thorvald, Keith Case, Amsterdam, Netherlands: IOS Press, 2018, s. 265-270Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

This paper presents an experimental study aimed at investigating interaction effects affecting personnel in manual assembly. The main experiment with 36 subjects used a mixed method design which included a quantitative study, including time and errors as dependent measures, and a qualitative study, including workload ratings and a questionnaire. The overall task in the experiment was to assemble components on a pedal car. The main factors involved were assembly information (text & component numbers or photographs), material presentation (using structured kits, unstructured kits and material racks) and component variation (situations with and without component variation). It was found that performance, measured in assembly time, was best when combining photographs with no component variants and when using an unstructured kit.

Ort, förlag, år, upplaga, sidor
Amsterdam, Netherlands: IOS Press, 2018
Serie
Advances in Transdisciplinary Engineering, ISSN 2352-751X, E-ISSN 2352-7528 ; 8
Nyckelord
manufacturing, information design, ergonomics, kitting, human performance
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
INF202 Virtual Ergonomics; Användarcentrerad produktdesign
Identifikatorer
urn:nbn:se:his:diva-16221 (URN)10.3233/978-1-61499-902-7-265 (DOI)000462212700043 ()2-s2.0-85057428313 (Scopus ID)978-1-61499-901-0 (ISBN)978-1-61499-902-7 (ISBN)
Konferens
16th International Conference on Manufacturing Research (ICMR), incorporating the 33rd National Conference on Manufacturing Research, September 11–13, 2018, University of Skövde, Sweden
Tillgänglig från: 2018-09-25 Skapad: 2018-09-25 Senast uppdaterad: 2019-04-04Bibliografiskt granskad
Thorvald, P., Lindblom, J. & Andreasson, R. (2017). CLAM – A method for cognitive load assessment in manufacturing. In: James Gao (Ed.), Gao, J., El Souri, M., Keates, S. (Ed.), Advances in Manufacturing Technology XXXI: . Paper presented at 15th International Conference on Manufacturing Research, incorporating the 32nd National Conference on Manufacturing Research, September 5 – 7, 2017, University of Greenwich, UK (pp. 114-119). Amsterdam: IOS Press, 6
Öppna denna publikation i ny flik eller fönster >>CLAM – A method for cognitive load assessment in manufacturing
2017 (Engelska)Ingår i: Advances in Manufacturing Technology XXXI / [ed] Gao, J., El Souri, M., Keates, S., Amsterdam: IOS Press, 2017, Vol. 6, s. 114-119Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

The increasing complexity and demands of assembly operations in manufacturing has been shown to lead to increased cognitive load in assembly workers. Previous work has outlined the complexity of an assembly worker’s situation both in terms of difficulty and speed of work and there have been a few attempts at creating frameworks and methods for understanding the key aspects of what creates increased cognitive load. This paper presents a tool for assessing cognitive load in manufacturing, primarily assembly. The paper presents the method and an accompanying tool as well as some insights derived from this method development. The intended contribution of the work is to make a difference in reducing the cognitive load of assembly workers on the shop floor, thus focusing the development on applicability and usability of the tool in practice. 

Ort, förlag, år, upplaga, sidor
Amsterdam: IOS Press, 2017
Serie
Advances in Transdisciplinary Engineering Series, ISSN 2352-7528, E-ISSN 2352-751X ; 6
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Användarcentrerad produktdesign; Interaction Lab (ILAB); INF202 Virtual Ergonomics; INF302 Autonoma intelligenta system
Identifikatorer
urn:nbn:se:his:diva-14089 (URN)000440620700019 ()2-s2.0-85028376430 (Scopus ID)978-1-61499-791-7 (ISBN)978-1-61499-792-4 (ISBN)
Konferens
15th International Conference on Manufacturing Research, incorporating the 32nd National Conference on Manufacturing Research, September 5 – 7, 2017, University of Greenwich, UK
Tillgänglig från: 2017-09-06 Skapad: 2017-09-06 Senast uppdaterad: 2019-02-14Bibliografiskt granskad
Kolbeinsson, A., Thorvald, P. & Lindblom, J. (2017). Coordinating the interruption of assembly workers in manufacturing. Applied Ergonomics, 58, 361-371
Öppna denna publikation i ny flik eller fönster >>Coordinating the interruption of assembly workers in manufacturing
2017 (Engelska)Ingår i: Applied Ergonomics, ISSN 0003-6870, E-ISSN 1872-9126, Vol. 58, s. 361-371Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This paper examines how interruptions from information and communications technology systems affect errors and the time to complete tasks for assembly workers. Interruptions have previously been examined in laboratory experiments and office environments, but not much work has been performed in other authentic environments. This paper contains the results of an experiment that was performed in a simulated manufacturing assembly environment, which tested the effects of interruptions on a manual assembly task. The experiment used existing interruption coordination methods as a basis, and the results showed a difference in the effect of interruptions and interruption coordination between cognitively complex laboratory tasks and manual assembly tasks in an authentic environment. Most notably, the negative effects of interruptions delivered without consideration were smaller in this experiment. Based on these findings, recommendations were developed for designing interruption systems for minimizing the costs (errors and time) imposed by interruptions during assembly tasks in manufacturing.

Ort, förlag, år, upplaga, sidor
Elsevier, 2017
Nyckelord
Interruptions, Manual assembly, Manufacturing
Nationell ämneskategori
Övrig annan teknik
Forskningsämne
Teknik; Användarcentrerad produktdesign; Interaction Lab (ILAB); INF202 Virtual Ergonomics; INF302 Autonoma intelligenta system
Identifikatorer
urn:nbn:se:his:diva-12770 (URN)10.1016/j.apergo.2016.07.015 (DOI)000384776100042 ()27633233 (PubMedID)2-s2.0-84982833592 (Scopus ID)
Projekt
Sense&React
Forskningsfinansiär
EU, FP7, Sjunde ramprogrammet, FP7-314350
Tillgänglig från: 2016-08-09 Skapad: 2016-08-09 Senast uppdaterad: 2019-09-05Bibliografiskt granskad
Brolin, A., Thorvald, P. & Case, K. (2017). Experimental study of cognitive aspects affecting human performance in manual assembly. Production & Manufacturing Research, 5(1), 141-163
Öppna denna publikation i ny flik eller fönster >>Experimental study of cognitive aspects affecting human performance in manual assembly
2017 (Engelska)Ingår i: Production & Manufacturing Research, ISSN 2169-3277, Vol. 5, nr 1, s. 141-163Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This study investigate different ways of presenting material and information at workstations while using mixed assembly mode with product variants. The experimental set up annotated an assembly line involving 36 subjects. The material presentation factor involved the use of a material rack compared to using an unstructured kit as well as a structured kit. The information presentation factor involved using a text and number instruction compared to a photograph instruction, and situations with and without component variation were considered. Results show that assembly times and workload ratings were lower when using a kit, whereas using a material rack resulted in perceived decreased workflow and increased stress and frustration. Moreover, assembly times and workload ratings were lower when using photographs, whereas using text and numbers increased mental workload. The results could be useful when planning work places and production systems in order to obtain a better workflow and an increased human performance. 

Ort, förlag, år, upplaga, sidor
Taylor & Francis, 2017
Nyckelord
manual assembly, manufacturing, information presentation, material supply, kitting, cognitive workload, human performance
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Användarcentrerad produktdesign; INF202 Virtual Ergonomics
Identifikatorer
urn:nbn:se:his:diva-14170 (URN)10.1080/21693277.2017.1374893 (DOI)000412286800002 ()2-s2.0-85029954849 (Scopus ID)
Tillgänglig från: 2017-09-27 Skapad: 2017-09-27 Senast uppdaterad: 2019-11-13Bibliografiskt granskad
Andreasson, R., Lindblom, J. & Thorvald, P. (2017). Interruptions in the wild: portraying the handling of interruptions in manufacturing from a distributed cognition lens. Cognition, Technology & Work, 19(1), 85-108
Öppna denna publikation i ny flik eller fönster >>Interruptions in the wild: portraying the handling of interruptions in manufacturing from a distributed cognition lens
2017 (Engelska)Ingår i: Cognition, Technology & Work, ISSN 1435-5558, E-ISSN 1435-5566, Vol. 19, nr 1, s. 85-108Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This paper presents a study examining interruptionsin the wild by portraying the handling of interruptionsin manufacturing from a distributed cognitionlens. By studying how interruptions occur and are handledin the daily activities of a work team at a large foundry forcasting heavy diesel engines, we highlight situations whenthe propagation, transformation, and representation ofinformation are not supported by prescribed work processesand propose recommendations for how this can beamended. The study was conducted by several visits to theaforementioned factory with cognitive ethnography as thebasis for the data collection. The focus was on identifyinginterruptions and analysing these through a distributedcognition framework as an initial step towards studyinginterruptions in a manufacturing environment. The keyfindings include the identification of three, previouslyundefined, types of interruptions and the conclusion thatinterruptions do indeed affect the distributed workload ofthe socio-technical system and thus the overall productionperformance at the casting line.

Ort, förlag, år, upplaga, sidor
Springer, 2017
Nyckelord
Manufacturing, Interruptions, Distributed cognition, Cognitive ethnography
Nationell ämneskategori
Övrig annan teknik
Forskningsämne
Teknik; Interaction Lab (ILAB); Användarcentrerad produktdesign; INF202 Virtual Ergonomics; INF302 Autonoma intelligenta system
Identifikatorer
urn:nbn:se:his:diva-13272 (URN)10.1007/s10111-016-0399-6 (DOI)000394999300006 ()2-s2.0-85007170452 (Scopus ID)
Forskningsfinansiär
EU, FP7, Sjunde ramprogrammet, 314350
Tillgänglig från: 2016-12-29 Skapad: 2016-12-29 Senast uppdaterad: 2019-02-14Bibliografiskt granskad
Organisationer
Identifikatorer
ORCID-id: ORCID iD iconorcid.org/0000-0002-8369-5471

Sök vidare i DiVA

Visa alla publikationer